Pearson 70 User Manual download pdf (Page 41)

4-1

Chapter 4

Scanner Checkout

Overview

This chapter discusses the procedures for scanner checkout, pre-installed system

software, system verification and backup, and customer hand-off.

Scanner Checkout Procedures

To checkout the OpScan iNSIGHT 70 scanner, refer to the following sections in

the Maintenance Manual for the OpScan iNSIGHT™ 70 Scanner:

• Hopper and Stacker Operational Checkout (Section 2.6)

• Sensor Checkout Procedures (Section 2.8)

• Read Station Adjustments (Section 3.2)

• Check Alignment (Section 5.2.4.8)

• Hopper Height Adjustments (Section 3.5)

• Pick Area Adjustments (Section 3.3)

• Calibrating (and Normalizing) the Scanner (Section E.2)

System Software

OpScan iNSIGHT 70 scanner system software, ScanTools

Plus, is pre-installed at

Pearson NCS. For information regarding this software, refer to the ScanTools

Plus User’s Guide. This guide includes information on installation, setup, and

configuration. Error messages are not documented in this publication. For

information on the error messages, refer to the online help.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

No comments

Pearson 70 User Manual Page 41